It is a system designed specifically for cable operators that need to monitor multiple signals at low cost. The system scans analog signals (PAL or NTSC), as well as digital signals (automatically tuning by sending IR commands to the Set Top Box.
The system changes the channel automatically across the guide.
Report fault alarms in the channels.
The configuration and operation is 100% Web (HTML5). It does not require plugins. Compatible with all standard browsers in the market.
Monitoring of more than 150 TV channels in 2 inputs
The system has an analog input to scan the analog grid and a digital video input to remotely control a Set Top Box
You can watch the live video or the video of the recorded channel sequence.
It has a display output to see live scanning and alarms.
Generates a copy of the recording of the channel change sequence to be able to verify the faults.
You can purchase the complete solution (Hardware plus Software), better known as turnkey. The hardware is dimensioned depending on the requirements of the client, it can either Profesional or Entry Level version.
The lifetime license of Software option allows the customer to use their own hardware (previously recommended by us). An installation of Centos 7 basic is required, and then through a USB key the software is validated.
The option of annual license of Software allows the customer to decrease the initial investment. After 5 years the license becomes perpetual. There is also the Leasing options.